
Your orthotic insoles do a lot of hard work. They support your arches, spread pressure across your feet and help keep you comfortable through long days. But they also soak up sweat, dirt and bacteria every time you wear them. Sooner or later, that shows up as odor, stains, stiffness or a grimy surface. Knowing how to clean orthotic insoles the right way keeps them fresh, hygienic and effective for longer.
The catch is that orthotics are not like ordinary shoe liners. Many are made from layered foam, firm plastic shells, gel, leather, cork or fabric tops held together with adhesive. Washing them the wrong way can warp the shape, break down the glue or ruin the support you paid for. This guide walks you through a safe, simple method, plus tips for removing odor, drying properly and knowing when it is time for a replacement pair.
Quick Answer
To clean orthotic insoles, remove them from your shoes, brush off loose debris, gently scrub both sides with a soft brush dipped in mild soapy lukewarm water, wipe away the soap with a damp cloth, and let them air dry flat for about 24 hours away from heat and direct sun. Never machine wash, tumble dry or soak them, and always follow the manufacturer’s or your clinician’s instructions for custom orthotics.
Why Cleaning Your Orthotic Insoles Matters
Your feet contain a large number of sweat glands, and an insole sits right underneath them for hours at a time. Warm, damp, enclosed shoes create ideal conditions for bacteria and fungi to grow. Regular cleaning offers several benefits:
- Less odor: bacteria feeding on sweat are the main cause of smelly shoes and insoles.
- Better foot hygiene: a clean surface helps lower the chance of skin irritation and fungal problems such as athlete’s foot.
- Longer life: built-up salt from sweat and ground-in dirt can break down foam and top covers over time.
- More comfort: a clean, dry insole feels softer and grips your sock better, so it moves less inside the shoe.
- Better value: orthotics can be expensive, so protecting them protects your money.
Check the Material and the Instructions First
Before you wet anything, spend a minute identifying what your insoles are made of. This one step prevents most cleaning mistakes.
- Foam or EVA insoles: the most common type. They tolerate gentle surface cleaning, but heat and soaking can compress or warp them.
- Gel insoles: usually wipe-clean. Avoid sharp scrubbing and harsh chemicals that can damage the gel.
- Hard plastic or carbon-fiber shell orthotics: the shell can be wiped down, but the fabric top cover and adhesive need care.
- Leather, suede or cork tops: clean with a lightly damp cloth only. Soaking can cause stiffening, cracking or crumbling.
- Custom prescription orthotics: always check the care sheet from your clinician or the maker. These are made for your feet and should not be treated like generic liners.
If the packaging or care card says something different from this guide, follow the manufacturer’s advice. They know the exact materials and glues used.
What You Need to Clean Orthotic Insoles
You do not need special equipment. Most of this is probably already in your home.

How to Clean Orthotic Insoles: Step by Step
Follow this process for regular foam, gel and standard fabric-topped insoles. It is also a safe starting point for many custom orthotics, as long as the care instructions do not say otherwise.

Step 1: Remove and Inspect the Insoles
Pull the insoles out of your shoes. Look at both sides. Check for cracks, peeling top covers, flattened areas or any sign of mold. If the support looks collapsed or the edges are coming apart, cleaning will not fix it and it may be time to replace them.
Step 2: Brush Off Loose Dirt
Knock the insoles together lightly to shake out grit. Then use a dry, soft brush to sweep away dust, lint and dried mud. Doing this first prevents dirt from turning into a muddy paste once you add water.
Step 3: Mix a Mild Cleaning Solution
Fill a bowl with lukewarm water and add a few drops of mild dish soap or gentle hand soap. Stir until it makes light suds. Lukewarm is key. Hot water can warp foam and weaken the adhesive that holds layers together.
Step 4: Scrub Gently
Dip a soft brush or toothbrush into the soapy water, shake off the excess, and scrub both sides in light circular motions. Pay extra attention to the heel and forefoot, where sweat and dirt collect most. Work with a damp brush, not a dripping one. The goal is to clean the surface, not to saturate the insole.
Step 5: Rinse by Wiping
Dampen a clean cloth with fresh lukewarm water and wipe away the soap. You may need to rinse the cloth and wipe a couple of times. Do not hold the insole under running water or submerge it, since soaked foam takes a long time to dry and can develop odor or mold from the inside.
Step 6: Air Dry Flat
Blot the insoles with a clean towel, then lay them flat in a well-ventilated spot at room temperature. Allow around 24 hours, or longer for thick foam. Make sure they are completely dry before putting them back in your shoes. Damp insoles go straight back to smelling.
How to Remove Odor From Orthotic Insoles
If the insoles still smell after cleaning, or you want to prevent odor between washes, try one of these gentle methods.
Baking Soda
Sprinkle a light layer of baking soda over the dry insoles and leave them for several hours or overnight. Baking soda absorbs moisture and helps neutralize odor. Tap or brush it off thoroughly before wearing.
Diluted White Vinegar Wipe
Some people lightly wipe the surface with a cloth dampened with a mix of equal parts water and white vinegar, then wipe again with plain water and let the insoles dry. Test a small, hidden area first, and skip this on leather, suede, cork or custom orthotics unless the manufacturer says it is fine.
Surface Disinfecting
If you have had athlete’s foot or another foot infection, you may want to disinfect more carefully. Ask your doctor or the insole maker which products are safe for your material, because some disinfectants can damage foam, adhesive or fabric. Washing your shoes and socks at the same time is important, or the problem can come straight back.
Prevent Odor in the First Place
- Remove the insoles from your shoes after wearing so both can air out.
- Rotate between two pairs of shoes so each pair dries fully for a day.
- Wear clean, moisture-wicking socks rather than damp cotton.
- Dry your feet well before putting on shoes.
- Consider a foot powder or odor-absorbing product to keep sweat under control.
Cleaning Do’s and Don’ts

Why You Should Never Machine Wash or Tumble Dry Insoles
The tumbling action can bend the arch support out of shape, and the heat can melt or loosen glue and shrink foam. Even if the insole survives one wash, its support may be reduced without you noticing. Hand cleaning takes only a few minutes and protects the shape that does the real job.
Why Heat and Sun Are a Problem
Radiators, hair dryers, heaters and hot cars can warp the foam and plastic. Leaving insoles in direct sun can also make materials brittle and fade the cover. A gentle, room-temperature air dry is always safer, even if it is slower.
Speeding Up Drying Safely
If you need the insoles sooner, place them in front of a fan or in a breezy, shaded spot and keep them flat. You can also pat them with a dry towel a few times. Do not put them near a heater, and do not wear them until the inside of the foam feels completely dry.
How Often Should You Clean Orthotic Insoles?
There is no single rule, because it depends on how often you wear them, how much you sweat and what activities you do. As a practical guide, a light routine works well for most people.

Athletes, people who stand all day, and anyone with sweaty feet may need to clean more often. If you wear your insoles only occasionally, you can stretch the deep cleaning interval.
Special Cases: Different Types of Orthotics
Custom Prescription Orthotics
These are made specifically for your feet and often cost much more than store-bought insoles. In general, wipe them with a damp cloth and mild soap, avoid soaking, and let them air dry flat away from heat. Always follow the care sheet from your clinician or lab, and ask them if you are unsure.
Insoles With Leather or Suede Covers
Leather and suede should be wiped with a barely damp cloth and mild soap, then dried naturally. Too much water can cause the leather to stiffen or crack. Never scrub hard, and never use a water bath.
Gel Insoles
Gel is usually easy to wipe clean. Use soapy water on a cloth, rinse by wiping, and let them dry. Avoid sharp tools and strong solvents, and keep them away from heat so the gel does not distort.
Insoles for Kids
Children’s orthotics often get very sweaty and muddy. The same gentle approach applies. Let them dry fully between wears, and consider rotating pairs of shoes so insoles are never put back in damp.
Best Types of Products to Keep Insoles Fresh
These items can make insole care easier. Choose according to your needs and the materials of your insoles.
- Soft cleaning brushes and microfiber cloths: make gentle surface cleaning quick and safe.
- Gentle shoe and insole cleaner: a mild, ready-to-use cleaner can be convenient. Check that it is safe for your insole material.
- Shoe deodorizers and foot powder: help absorb moisture and manage odor between cleanings.
- Gentle shoe dryers or ventilated storage: help shoes and insoles dry fully overnight without strong heat.
- A spare pair of insoles: lets you rotate pairs so each one dries completely and lasts longer.
When to Replace Your Orthotic Insoles
Cleaning can extend the life of your insoles, but nothing lasts forever. Consider replacing them if you notice:
- Visible cracks, splits, peeling edges or a delaminating top cover
- Flattened or collapsed arch support that no longer feels firm
- Persistent odor that returns right after cleaning
- Mold or mildew that does not wipe away
- Pain or discomfort that has come back, even though nothing else has changed
As a rough guide, many over-the-counter insoles are replaced about every 6 to 12 months with regular use, though heavy use may shorten that. Custom orthotics often last longer, but they should be reviewed periodically. Ask your clinician how often yours should be checked or refurbished.
Common Mistakes to Avoid
- Soaking the insoles in a bucket: water gets trapped in the foam and weakens the glue.
- Using bleach or strong chemicals: these can discolor, harden or break down materials.
- Putting insoles back damp: the fastest way to bring odor and bacteria back.
- Ignoring the shoes: a dirty shoe will quickly dirty a clean insole.
- Scrubbing too hard: aggressive brushing can fray the top cover and loosen layers.
- Skipping the care instructions: different materials need different handling.
Frequently Asked Questions
Can I wash orthotic insoles in the washing machine?
It is best not to. The tumbling and heat can warp the support and weaken the glue, and a custom pair may be ruined. Hand cleaning with mild soap and lukewarm water is safer and only takes a few minutes.
Can I put orthotic insoles in the dryer?
No. Dryer heat can shrink, bend or melt foam, gel and adhesive. Always air dry at room temperature.
How do I get the smell out of orthotic insoles?
Clean them with mild soap and lukewarm water, dry them completely, then use baking soda overnight to absorb leftover odor. Preventing moisture with moisture-wicking socks and rotating shoes keeps the smell from returning.
How long do orthotic insoles take to dry?
Usually about 24 hours at room temperature, depending on thickness and humidity. Thick foam may take longer. They must be completely dry before you wear them.
Can I use alcohol wipes or disinfectant on insoles?
Some people do for light surface sanitizing, but it depends on the material and the product. Alcohol and strong disinfectants can damage some foams, glues and fabrics. Check with the manufacturer or your clinician first.
Can I use vinegar to clean insoles?
A diluted vinegar wipe may help with odor on some synthetic insoles, but test a small spot first and rinse by wiping with plain water afterward. Avoid it on leather, suede, cork and custom orthotics unless the maker approves.
Is it normal for insoles to change color?
Yes. Some fading or yellowing happens with sweat, age and sunlight. If the support and structure are still good, a color change alone is not a reason to replace them.
Final Thoughts
Learning how to clean orthotic insoles takes only a few minutes, but it makes a real difference. Brush off the dirt, clean gently with mild soap and lukewarm water, wipe instead of soaking, and let them dry completely at room temperature. Add simple habits like airing them out after wear, using moisture-wicking socks and rotating your shoes, and your insoles will stay fresher, last longer and keep supporting your feet the way they should.
Disclaimer: This article is for general information only. Always follow the care instructions from the manufacturer or your healthcare provider, especially for custom prescription orthotics. If you have persistent foot pain, skin problems or signs of infection, consult a qualified healthcare professional.
